banner4

In progress
NEMS e-Busz 50%

Retrofit of a city bus with The Wheel technology for NEMS. Continue...
HyMove city bus 50%

Construction of a fuel-cell powered city bus.

5 Whisper buses: 65%

5 Hybrid citybuses for Apeldoorn community. Continue...
Hybrid Mercedes G 55%

Conversion of a passenger car into an electrically powered vehicle. Continue...
Leightweight bus 10%

Conversion of a leightweight bus based on X97 into new e-Traction bus. Continue...

Contact information

e-Traction Europe BV
Vissenstraat 36
7324AL Apeldoorn
T: +31 55 521 1111
F: +31 55 522 2366
@: info@e-Traction.eu

Asynchronous Chopper systems by ZAPI

As the pioneer of AC motor controller technology, ZAPI has more than 10 years of experience in developing a full line of AC controllers. These units feature a multi-plex communications platform with unmatched flexibility. ZAPI AC controllers offer enhancements in vehicle control, operation, performance and efficency.

Product range

The ZAPI family of AC controllers represents the widest range of AC products currently available in the low voltage electric vehicle market.The power capabilities of these systems range from 0,5kW to 20kW.

Common characteristics

I/O

  • 9 Digital inputs (input range - Batt÷ +Batt )
  • 3 Analogue inputs (input range 0 ÷ 12 V )
  • 1 Incremental encoder port
  • 2 Outputs driving to - BATT:
  • . LC driver 1,5 A continuous
  • . EB driver 1,5 A continuous

Functionalities

  • 16 bits microcontrollers
  • Flash memory
  • Can interface
  • Serial link
  • Available with Al base plate or with finned heat sink

Zapimos Asynchronous chopper AC-x

The AC-X Inverter is suitable for Pedestrian, small stacker trucks, Stackers and cleaning machine fitted with asynchronous motors up to 800 W.

  • Power supply: 24,36,48 volt
  • Maximum current: (24, 36v) 100Arms (2') (48v) 80Arms (2')
  • Continuous output power: 500 W
  • Ambient Temperature range: -40° + 40°C

Zapimos Asynchronous chopper AC-0

The AC-X Inverter is suitable for Pedestrian, small stacker trucks, Stackers and cleaning machine fitted with asynchronous motors up to 1,5kW.

  • Power supply: 24,36 volt
  • Maximum current: 150Arms (2')
  • Current booster: 10% Imax 10''
  • Continuous output power: 1500 W
  • Ambient Temperature range: -40° + 40°C

Zapimos Asynchronous chopper AC-1

The AC-1 Inverter is suitable for order pickers and stacker trucks fitted with asynchronous motors up to 2.5kW

  • Power supply: 24,36,48,80 volt
  • Maximum current: (24,36v) 250Arms (2')
  • (48v) 225Arms (2') (80v) 160Arms (2')
  • Current booster: 10% Imax 10''
  • Continuous output power: 1500 W

Zapimos Asynchronous chopper AC-2

The AC-2 Inverter is suitable for reach and counterbalanced trucks with single or twin drive motors, high level order pickers and tow tractors fitted with asynchronous motors up to 7kW.

  • Power supply: 24,36,48,72,80 volt
  • Maximum current: (24,36v) 500Arms (2');
  • (36,48v) 450Arms (2'); (72,80v) 400Arms (2');
  • Continuous output power:
    (24V) 5000 W
    (48V) 6500 W
    (80V) 9000 W

Zapimos Asynchronous chopper AC-3 flash

The AC-3 Inverter is suitable for tow tractors and counterbalanced trucks fitted with asynchronous motors up to 16kW.

  • Power supply: 36,48,72,80,96 volt
  • Maximum current: (36,48v) 600Arms (3');
  • 72,80v) 600Arms (3');(96v) 500Arms (3')
  • Continuous output power:
    (48V) 10000 W
    (80V) 16000 W & (80V) 9000 W

Zapimos Asynchronous chopper AC-4 flash

The AC-4 Inverter is suitable for large tow tractors and counterbalanced trucks fitted with asynchronous motors up to 20kW

  • Power supply: 36,48,72,80,96 volt
  • Maximum current: (36,48v) 750Arms (3');
  • (72,80v) 650Arms (3'); (96v) 450Arms (3')
  • Continuous output power:
    (48V) 12000 W
    (80V) 16000 W
  • Switching frequency: 8KHZ